An orange or yellow exclamation mark is a warning—but there’s no need to panic when it lights up.
Seeing a flashing or steady exclamation mark on your dashboard can unsettle even experienced drivers. Here’s what the signal means and how to respond when it appears.
An orange or yellow exclamation mark is typically a cautionary warning, not a sign of a critical failure. It usually points to a malfunction in secondary systems or sensors. To understand exactly what it means for your specific vehicle, check your owner’s manual—it’s always worth keeping it close.
A red exclamation mark inside a circle, meanwhile, often indicates that the parking brake is still engaged. Many models use this exact symbol to alert drivers. In some cars, you might instead see “BRAKE” or a circled “P.”
If you’ve released the parking brake and the red light remains on, it may signal a brake system issue. In this situation, pull over safely, check under the hood, and inspect the brake fluid level. If it’s critically low, don’t continue driving until you’ve topped it up—fluid could be leaking from a damaged hose or another component.
On most dashboards, yellow exclamation marks can generally be grouped into three categories: brake system warning lights, lighting system warning lights, and central warning indicators. Knowing which category your warning belongs to can help you pinpoint the cause and decide on the right course of action.
The brake system warning light appears on the car dashboard, which means that there is one or more faults in the current braking system. The specific reasons are as follows:
One is that the brake fluid of the vehicle is lacking and lower than the minimum scale. You can open the hood to check whether the fluid level of the lower brake fluid meets the standard. If the fluid level is low, you can make up.
The second is the high moisture content of the brake fluid. Due to the long-term use of the vehicle, the brake fluid will be affected by the surrounding environment, and the moisture content will gradually increase, which will cause the fault light to light up. For such reasons of failure, it is only necessary to replace the new brake fluid and then drain it to solve the problem.
The third is that the fluid level sensor in the brake oil pot is damaged, which will cause the brake fluid level monitoring to be inaccurate after it is damaged. When processing, you can use a screwdriver to plan the float in the oil pot first, it may be caused by the misalignment caused by the stuck float. If the fault persists, the level sensor needs to be replaced.
The light system warning light appears on the car dashboard, which means that there is one or more faults in the current lighting system. The fault light mainly exists on Volkswagen, Audi and other models. The specific reasons are as follows:
One is due to damage to the bulbs outside the car. When processing, you can turn on all the lights of the vehicle, then check one by one, and finally replace the damaged bulbs to solve the problem. However, it should be noted that when checking, not only whether the light is bright, but also whether the brightness is sufficient, because some light bulbs will cause the meter to alarm, but in fact it is still lit. In addition, it is important to check the license plate light bulb, because it is the most easily overlooked light bulb, and its damage will also cause the light warning light to come on.
The second is that the bulbs replaced by the vehicle do not conform to the model of the original bulbs. For example, the power becomes larger, or the halogen bulbs are replaced by LED bulbs, which will cause the light warning lights. Therefore, it is recommended that all riders pay attention to the choice of models when replacing the bulbs.
The third is that the fuse and relay of the bulb are damaged. You can use a test lamp or a multimeter to measure the power supply and grounding. If there is no voltage output, the fuse is damaged. The solution is to replace the damaged fuse or relay.
Finally, to sum up, there are roughly three kinds of fault lights that display yellow exclamation marks on the car dashboard, namely the brake system warning lights, which are caused by the lack of brake oil, high water content and damage to the liquid level sensor; the lighting system warning lights, The reason for it to light up is a damaged bulb, the wrong model, and a blown fuse; while the central warning light is caused by insufficient water in the glass, insufficient power in the remote control key, and lack of coolant. The above is all about the yellow exclamation mark fault light, I hope it can be helpful to the riders.
Read the original article on Auto30.