People have been speculating for years about what these holes really are.
Every driver has probably noticed those strange, circular holes in the asphalt at least once. Over time, countless theories—some wild, some downright absurd—have sprung up about what causes them. Some of the guesses are so out there that it’s hard not to chuckle. It’s time to set the record straight and explain exactly what these odd little pits really are.
These holes are actually the result of removing cylindrical cores, commonly called “cores,” from the pavement. Typically, several cores are taken from different spots. Over time, myths and misunderstandings about why this is done have built up, but the reality is much simpler than the rumors suggest.
Some people think these cores are cut out to allow the asphalt to expand and contract with heat. Others assume they’re part of a drainage system. A few have even come up with full-blown conspiracy theories. In truth, the process is straightforward and entirely practical.
Cores are usually taken within a few days of paving. Specialized equipment—a core drill or a saw designed for hard materials—is used to cut them out. The samples are then sealed in protective containers and sent to a laboratory, where they are tested to determine the quality of the pavement.
A core is a cylindrical sample of asphalt or concrete removed from the pavement for laboratory testing. These samples help engineers measure:
How It’s Done in the U.S.:
Special core drills are used—usually electric or gas-powered—with diamond-tipped bits.
When and Why Cores Are Taken:
It’s a routine practice and perfectly safe for the pavement. After the cores are removed, the holes are filled with fresh material and compacted to restore the road surface.