Modern vehicles come packed with standard safety systems like ABS, ESP, and traction control. Here’s where ASR fits in—and why drivers sometimes disable it.
Think back to older cars that were once considered the height of luxury—models like the 1955 Cadillac Fleetwood or a GMC from the mid-1980s. By today’s standards, they were mechanically simple. No complex electronic systems, just a basic carbureted engine, a durable transmission that often outlived the car itself, and very little electronics to malfunction or require software updates. Many of those vehicles routinely logged hundreds of thousands of miles, and when something did break, most drivers could fix it themselves with basic tools.
That simplicity came at a cost. Older cars lacked many of the safety systems we now take for granted—features that not only protect occupants in a crash, but also help prevent dangerous situations in the first place, such as skidding or loss of control. Today, it’s hard to find a modern vehicle without core systems like ABS, ESP, and traction control. These technologies genuinely help drivers, especially in winter or on slick surfaces. Even so, many drivers occasionally choose to switch some of them off.
At first glance, that may seem illogical. After all, these systems are designed to make a car more predictable and stable in difficult conditions. Yet in certain situations, turning them off can actually make sense.
Many modern vehicles are equipped with an ASR OFF button. ASR stands for Acceleration Slip Regulation and is essentially a traction control system.
Its job is to prevent the drive wheels from spinning during acceleration or when pulling away from a stop. ASR manages engine power and braking to keep wheel slip in check, which is especially useful on snow, ice, slush, or wet dirt roads where traction is limited.
Despite its benefits, there are times when drivers deliberately disable ASR—and for good reason. Even vehicle owner’s manuals often note that if a car is stuck in deep snow, mud, or on a slick dirt surface, temporarily turning off ASR can help improve mobility.
In these situations, a certain amount of wheel spin is actually helpful. The traction control system can limit power so aggressively that it effectively “chokes” the vehicle, preventing it from rocking free or building the momentum needed to escape. Turning ASR off for a short time can allow the wheels to spin just enough to get moving again.
That said, there’s an important rule to remember. Once the vehicle is back on solid ground and driving normally, ASR should always be turned back on. Reactivating the system restores the intended level of safety and stability.
Finally, a simple recommendation for all drivers: take a few minutes to read your vehicle’s owner’s manual. It often answers questions like this—and helps you understand when and how to use your car’s safety systems properly.